Cam online – Cumming The Fragrance http://cummingthefragrance.com/ Fri, 03 Dec 2021 07:41:35 +0000 en-US hourly 1 https://wordpress.org/?v=5.8 https://cummingthefragrance.com/wp-content/uploads/2021/10/icon-120x120.jpg Cam online – Cumming The Fragrance http://cummingthefragrance.com/ 32 32 Researchers: Police body cameras produce a “civilizing effect” https://cummingthefragrance.com/researchers-police-body-cameras-produce-a-civilizing-effect/ Fri, 03 Dec 2021 05:57:38 +0000 https://cummingthefragrance.com/researchers-police-body-cameras-produce-a-civilizing-effect/ PORTLAND, Ore. (KOIN) – The Mental Health Alliance has helped moderate a online chat Thursday, of a potential police body worn camera program to be carried out at the Portland Police Department. A panel researcher said research shows that the use of body-worn cameras has resulted in reduced complaints from citizens in other cities using […]]]>

PORTLAND, Ore. (KOIN) – The Mental Health Alliance has helped moderate a online chat Thursday, of a potential police body worn camera program to be carried out at the Portland Police Department.

A panel researcher said research shows that the use of body-worn cameras has resulted in reduced complaints from citizens in other cities using the cameras. They said the key is letting people know the cameras are rolling and it looks like Portland is on the right track to doing so on its proposed schedule.

As Portland continues to determine what its body camera program will look like, during mayoralty, CNA Corporation’s Dr Dan Lawrence said cities like Milwaukee and New York City that have already implemented body camera programs have experienced a decrease in complaints from citizens.

Lawrence said the drop in citizen complaints was more than 20% for cities where the studies took place.

“In Milwaukee, we saw a 29% reduction in citizen complaints for officers wearing body cameras. New York just released a study in the last week or so, they found a 21% reduction in complaints, and that has been seen in many other states as well, ”Lawrence said.

The researchers believe the reduction in complaints is due to something that has been called a “civilizing effect” for agents and those with whom they interact, noted Lawrence.

“An Arizona state professor hypothesized that there is a civilizing effect, if people know they have a camera and are recording them, and officers know they are have a camera on them, there will be a civilizing effect, they will behave differently because they know they are recorded, ”Lawrence said.

In cities that were the first to adopt body cameras, citizens were unaware that body cameras were present, so researchers say notification is important for people to understand that there is a recording and there is Looks like Portland is considering this for now as it moves ahead.

“I really appreciate that Portland is trying to implement a notification requirement that officers notify the community member that there is a camera worn on the body and that they record during this interaction,” Lawrence said. .

Comments and concerns were also brought forward about body cameras and their impact on people with mental health issues.

The MHA said some of the questions and comments gathered from members of the public Thursday will be included in a brief to be presented at a fairness hearing in January.


Source link

]]>
Hiding radars is the ‘wrong decision’ | Islander https://cummingthefragrance.com/hiding-radars-is-the-wrong-decision-islander/ Mon, 29 Nov 2021 06:24:39 +0000 https://cummingthefragrance.com/hiding-radars-is-the-wrong-decision-islander/ The removal of mobile speed camera warning signs in New South Wales was carried out “in good faith” but a former NSW highways minister making a rare public comment on the matter said that it was the “wrong decision”. Former NSW Highways Minister Duncan Gay told a NSW parliamentary committee on the Road Safety Inquiry […]]]>

The removal of mobile speed camera warning signs in New South Wales was carried out “in good faith” but a former NSW highways minister making a rare public comment on the matter said that it was the “wrong decision”.

Former NSW Highways Minister Duncan Gay told a NSW parliamentary committee on the Road Safety Inquiry that “one of the best (incentives) around security is a police car marked with a copper in it “and signal cameras had a similar effect.

But highway patrol cars that “back up in the trees and hide behind billboards” are “just plain fake.”

“Speed ​​cameras are important, but they shouldn’t be there to get trapped,” Gay said.

The public is “quite cynical” about speed cameras, and although he was not minister for roads when it happened, Mr Gay said the government made the decision to remove the signs in good faith on the road. the basis of the advice he had received.

He says the revenue increase allegations behind the decision were “a heap of garbage.”

During his tenure as highways minister between 2011 and 2017, Mr. Gay removed speed cameras which he said “did not serve an appropriate purpose.”

Some of them “were in the wrong place” and moved to other areas.

Additional cameras have been added to the collection and the number of cameras in the state has increased.

NSW opposition spokesman John Graham said the committee heard “a lot of common sense” from Mr Gay.

Mr Graham said public support had been compromised by removing the warning signs without consultation, but “there is now an opportunity to reach a bipartisan agreement on their return.”

Michael Lane, of the National Motorists Association Australia, told the survey earlier that more police officers actively patrolling the roads would improve public perception of law enforcement and be better than more cameras.

If an officer doesn’t stop people and tell them about their behavior, and just “hide in the bushes” to do speed checks, they are not doing their job properly.

“A camera is just fine in the post later, it doesn’t mean anything,” Mr Lane said.

The fines also had a more negative effect on people with less money, and losing your license in a regional area for accumulating demerit points made a bigger difference than for someone living in a city with less money. public transport options.

Director of the University of Adelaide’s Auto Safety Research Center Jeremy Wooley told the inquest that more police on the roads would help “to some extent,” but posed resource and financial issues.

“With automated camera technology, you can deploy over much larger areas and be much more efficient,” Dr. Wooley said.

He cited research suggesting that “even a threefold increase in police activity is not enough to generate the desired results”, and cameras should be placed with “a random element” because the location of fatal crashes changes from year to year.

“What we want is a widespread suppression effect, not just in the places where there has been a death,” said Dr Wooley.

The NSW government announced in November last year that warning signs for mobile speed cameras would be removed, but in August it announced that fixed warning signs would be deployed to remind motorists that they may be taken anywhere and anytime.

The partial rollback came after an increase in the number of people fined for exceeding the limit by less than 10 km / h, with the areas of western Sydney and the regional NSW being the first victims.

Associated Australian Press


Source link

]]>
“A good sign” – The release of two hostages from Haiti gives hope https://cummingthefragrance.com/a-good-sign-the-release-of-two-hostages-from-haiti-gives-hope/ Mon, 22 Nov 2021 21:26:15 +0000 https://cummingthefragrance.com/a-good-sign-the-release-of-two-hostages-from-haiti-gives-hope/ The release of two of the Christian Aid Ministries hostages held by a gang in Haiti is good news for residents following the case and for an organization following the kidnappings there. Christian Aid Ministries, based in Holmes County, announced on Sunday that two of the 17 people held captive since Oct. 16 have been […]]]>

The release of two of the Christian Aid Ministries hostages held by a gang in Haiti is good news for residents following the case and for an organization following the kidnappings there.

Christian Aid Ministries, based in Holmes County, announced on Sunday that two of the 17 people held captive since Oct. 16 have been released and “are safe, in good spirits and being treated,” according to a statement published online.

A spokesperson for the ministries said other details could not be provided, including the names of the hostages released and whether they were still in Haiti.

Two hostages freed:Christian Aid Ministries: Two of the 17 victims of kidnappings in Haiti are now free

The organization keeps its attention and prayers focused on the remaining 15 hostages.


Source link

]]>
Hawaii vs. Colorado State: How To Watch Online, Live Stream Info, Game Time, TV Channel https://cummingthefragrance.com/hawaii-vs-colorado-state-how-to-watch-online-live-stream-info-game-time-tv-channel/ Sun, 21 Nov 2021 07:01:12 +0000 https://cummingthefragrance.com/hawaii-vs-colorado-state-how-to-watch-online-live-stream-info-game-time-tv-channel/ through 3 quarters Although the Hawaii Rainbow Warriors were the underdogs at kickoff, they have since taken control of the game. Three quarters and their offense really knew how to impose its will, dominating the Colorado State Rams 36-17 in three quarters. Hawaii capitalized on the performance of QB Chevan Cordeiro, who had two touchdowns […]]]>

through 3 quarters

Although the Hawaii Rainbow Warriors were the underdogs at kickoff, they have since taken control of the game. Three quarters and their offense really knew how to impose its will, dominating the Colorado State Rams 36-17 in three quarters.

Hawaii capitalized on the performance of QB Chevan Cordeiro, who had two touchdowns and 354 yards on 36 attempts in addition to having a touchdown. The team received additional help from defensive threat DB Chima Azunna and his nine tackles.

No one has had an outstanding offensive game for Colorado State, but they did have scores from TE Gary Williams and TE Cam Butler. One of the most exciting moments was receiving a 69-yard touchdown by Butler in the first quarter.

The Rainbow Warriors’ lead is the biggest they’ve had this season heading into the fourth quarter.

Who plays

Colorado State in Hawaii

Current records: Colorado State 3-7; Hawaii 4-7

What there is to know

The Colorado State Rams and Hawaii Rainbow Warriors will face off in a matchup in Mountain West at 11 p.m. ET on November 20 at the Clarence TC Ching Complex. Both teams suffered a loss in their last game, so they will have a lot of motivation to get the “W”.

Colorado State fell to the Air Force Falcons last week, losing 35-21. No one has had a stellar game offensively for the Rams, but RB David Bailey led the way with two touchdowns.

Meanwhile, everything was tied 10-10 at halftime, but Hawaii wasn’t quite tied with the UNLV Rebels in the second half when they met last week. The Rainbow Warriors took a 27-13 hit in the loss column. A silver lining for them was the play of WR Nick Mardner, who caught four passes for a touchdown and 119 yards. One of the most exciting moments was Mardner receiving a 79-yard touchdown in the first quarter.

This next game is expected to be close, with Colorado State just 3 points away. Now might not be the best time to take on Colorado State ATS as they’ve let punters down for the past four straight games.

Colorado State is now 3-7 while the Rainbow Warriors are 4-7. Two defensive stats to keep in mind as you watch: The Rams are 193rd worst nationally in TDs allowed, with 17 over the season. Hawaii has seen its own struggles as it stumbles in the contest with the 225th most rushed touchdowns allowed in the nation, after dropping 22 during the season. It’s possible that one of those Achilles’ heels will end up tripping the losing team.

How to watch

  • When: Saturday at 11 p.m. ET
  • Or: Clarence TC Ching Complex – Honolulu, Hawaii
  • To follow: CBS Sports app

Odds

Rams are 3-point favorite against Rainbow Warriors, latest says college football odds.

The line drifted a bit towards the Rams as the game opened with the Rams as the 1.5 point favorite.

Over / Under: -112

See college football pick for every game, including this one, from SportsLine’s advanced computer model. Get Choices Now.

History of the series

Hawaii and Colorado State both have wins in their last two games.

  • August 25, 2018 – Hawaii 43 v Colorado State 34
  • September 30, 2017 – Colorado State 51 vs. Hawaii 21


Source link

]]>
Coach Ron Rivera prepares to face former QB Cam Newton https://cummingthefragrance.com/coach-ron-rivera-prepares-to-face-former-qb-cam-newton/ Fri, 19 Nov 2021 02:54:21 +0000 https://cummingthefragrance.com/coach-ron-rivera-prepares-to-face-former-qb-cam-newton/ Washington football quarterback Taylor Heinicke celebrates a touchdown from running back Antonio Gibson in the second half of an NFL football game against the Tampa Bay Buccaneers on Sunday, November 14 2021 in Landover, Maryland (AP Photo / Mark Tenally) Marc Tenally PA CHARLOTTE, North Carolina Ron Rivera knew that at some point he would […]]]>

title=

Washington football quarterback Taylor Heinicke celebrates a touchdown from running back Antonio Gibson in the second half of an NFL football game against the Tampa Bay Buccaneers on Sunday, November 14 2021 in Landover, Maryland (AP Photo / Mark Tenally)

PA

Ron Rivera knew that at some point he would have to prepare a game plan to face his former quarterback and longtime friend Cam Newton.

This time is there.

Newton is set to start Sunday when the Panthers (5-5) host the Washington football team (3-6) in a game that pits a quarterback against his former nine-season coach in Carolina.

Together, Newton and Rivera helped the Panthers reach the Super Bowl in the 2015 season and win three division titles.

Rivera was sacked at the end of the 2019 season and Newton was sacked the following offseason by a new Panthers scheme.

But Newton joined the Panthers last week on a one-year contract after Carolina quarterback’s situation reached the point of desperation after struggling starter Sam Darnold injured his shoulder for 4 at 6 weeks.

The return of the 32-year-old QB could not have gone better as he provided an instant jerk to the attack, scoring touchdowns the first two times he touched the ball coming off the bench during the Carolina’s 34-10 road victory last. week against the Arizona Cardinals. He single-handedly rejuvenated a team that had lost five of their previous six games.

Rivera is making his return to Charlotte, where he was a popular figure for most of his tenure.

“It’s going to be a hell of a game,” said Rivera.

Rivera said the Panthers added Newton was a “bold move” given the playmakers the team already have on offense, including Christian McCaffrey, DJ Moore and Robby Anderson.

“They have talent there,” Rivera said.

Newton crammed in to learn offense after joining the squad in practice last Friday. He was 10 to 15 games forfeited before the game in Arizona, but Panthers coach Matt Rhule is hoping Newton can grab enough offense to start this week against PJ Walker.

Rhule said it’s not so much about learning Newton’s playbook, but more about learning the game plan, including protections in the running and passing game.

“We all understand that Cam is like a force of nature in the things he brings to the pitch,” Rhule said. “But I don’t want that to be all people achieve. I haven’t known him until recently. What I see is a real professional who wants to win and devotes time to it.

Rivera added: “I think it’s an opportunity for him to come home, to pick up where he started. It’s a good deal.”

Things to watch out for when Washington visits Carolina.

HEINICKE’S RETURN

Rivera isn’t the only one who has ties to Carolina.

Washington starting quarterback Taylor Heinicke – along with his replacement Kyle Allen – previously played for the Panthers before moving to Washington.

“I think he’s playing a lot more confidently,” Rivera said of Heinicke. “I think his decision making is improving, obviously, and I think with him it’s just about getting reps and opportunities. I think he’s improved a lot and we see it. . “

In addition, executive vice president of Washington football and players staff Marty Hurney has held two positions as Carolina general manager.

HEALTHY TERRY

Terry McLaurin received a big blow from Tampa Bay safety Jordan Whitehead for a third try at the end of Washington’s surprise win last week and was promptly to his feet. The team’s top receiver with 632 yards and four touchdowns is determined to play that way and lead by example.

“I’m never afraid to go in the middle and put my nose in there to catch the ball, block and things like that because being a leader and the type of player that I am, I think that’s is extremely important, ”McLaurin said.

“I pray before every game just for health and strength. Gains, losses, production – things like that – those are bonuses to me. As long as I come out of the game healthy, I think that’s a blessing in itself.

LINE CHANGES

Washington will be starved of defensive Rookie of the Year Chase Young for the remainder of the season after tearing the ACL in his right knee. Also missing is Montez Sweat, who has a broken jaw.

Their absences mean more responsibility for young players like James Smith-Williams and rookie Shaka Tokey. Defensive tackle Daron Payne said the key is “to build that chemistry and learn to rush with young people and put them on the same page as us.” “

Leading the charge are former Payne teammate in Alabama and his other first-round pick Jonathan Allen, who walks around Washington with six sacks.

THE KEYS OF McCAFFREY

Christian McCaffrey played an increased role last week in his second comeback from a hamstring injury for Carolina and his playing time is expected to increase this week.

McCaffrey played 59% of the team’s plays and managed to gain 161 yards in scrum. His versatility as a receiver presents issues for a Washington defense that has struggled to defend running backers coming out of the backfield and ranks 30th overall against the pass. McCaffrey has 11 100-yard receiving games, the most running backs in NFL history.

REDDICK A FORCE

Haason Reddick has been a force in the Panthers outside linebacker this season, with 9 1/2 sacks. Reddick has 17 sacks in his last 14 games, dating back to last season with Arizona.

Washington has allowed 20 sacks this season.

___

AP Sports writer Stephen Whyno contributed to this report.


Source link

]]>
“Giant middle finger to the community”: alarm when cameras are set up on lane T3 on Onewa Rd in Auckland https://cummingthefragrance.com/giant-middle-finger-to-the-community-alarm-when-cameras-are-set-up-on-lane-t3-on-onewa-rd-in-auckland/ Wed, 17 Nov 2021 12:22:15 +0000 https://cummingthefragrance.com/giant-middle-finger-to-the-community-alarm-when-cameras-are-set-up-on-lane-t3-on-onewa-rd-in-auckland/ You will not pass (without a side step). Safety concerns have been expressed for the visually impaired and people using mobility scooters. Photo / Supplied Residents of the North Shore are outraged by the installation of new T3 cameras on Onewa Road which, according to them, presents a danger to the safety of pedestrians. Concerns […]]]>

You will not pass (without a side step). Safety concerns have been expressed for the visually impaired and people using mobility scooters. Photo / Supplied

Residents of the North Shore are outraged by the installation of new T3 cameras on Onewa Road which, according to them, presents a danger to the safety of pedestrians.

Concerns have been expressed over the camera poles, which some residents say will block the path, and their installation has been described as “incompetent” by a local politician – but Auckland Transport says installation is not yet complete and include additional safety features.

Photos shared online of the newly installed cameras show them sitting in the middle of the trail along the busy road, which is home to schools, churches and daycares.

The road, which is the primary access to the Harbor Bridge for residents of Northcote, Birkenhead and the surrounding suburbs, has long been plagued by slow commuter traffic.

A transit lane of one form or another has been operational on Onewa Rd since 1982, but was first strictly enforced in 2002, limiting one lane to mass transit and high-occupancy vehicles.

Since then it has become a strict two-way T3 lane during rush hour.

Until now, law enforcement has required Auckland Transport staff to be on the side of the road in all weather to catch those breaking the rules.

Earlier this year, it was announced that the rules would be controlled by installing 68 new cameras spread across 17 “staging areas” on the road.

At the time, Kaipātiki local council chairman John Gillon said law enforcement was necessary, but he was “shocked at the size of the hammer they are using to crack this nut.”

He said residents of Onewa Rd who had a real need to enter and exit T3 lane would be adversely affected by the camera array, citing the case of an elderly resident who was already worried about leaving her home after being ticketed for being in the transit lane after pulling out of its lane.

The cameras are now in place and it is not the enforcement of traffic rules that is forcing locals to ask Auckland Transport to radically rethink.

In some places, the posts leave little room for pedestrians to pass.  Photo / Supplied
In some places, the posts leave little room for pedestrians to pass. Photo / Supplied

“The location of these posts in the middle of the trail is both dangerous for the visually impaired and extremely inconvenient for walkers – the people for whom the trails are really intended,” one resident wrote on Facebook.

Other residents pointed out that the posts could pose a danger to people using mobility scooters and parents pushing twin strollers.

Several commentators called the layout “crazy” while others said “it looks like a third world country result” and described the poles as a “giant major for the community”.

Speaking to the Herald today, John Gillon said residents would “raise their hands in horror” at the location of the posts and described their installation as “incompetent”.

“The placement took no consideration for anyone walking or biking the trail,” he said, noting that the trail on the south side of the road has been designated as a shared path and cyclists are encouraged to use it.

Locals have raised concerns online about the location of the poles.  Photo / Supplied
Locals have raised concerns online about the location of the poles. Photo / Supplied

He said the local council had been pushing for the trail on the north side to also be converted to a shared path and that the installation of the poles was not supportive of the local council’s goal of improving the area for walkers. and cyclists.

Gillon said the placement of the poles was “really disappointing”, especially since the Auckland Transport illustrations had already shown them placed at the very edge of the trail.

“There are enough poles already because there are all along Onewa Road without these extra poles and that they are out of place is just appalling.”

An Auckland Transport illustration released before the poles were installed shows they are placed directly on the curb.  Photo / Transport Auckland
An Auckland Transport illustration released before the poles were installed shows they are placed directly on the curb. Photo / Transport Auckland

A spokesperson for Auckland Transport told the Herald that there are a number of factors to consider when setting up the poles and the installation is not yet complete.

“The delivery team worked with traffic engineering and a road safety audit was carried out, to support the positioning of the equipment,” the spokesperson said, adding that they had to be built around the existing services. .

“The standards apply not only to the sidewalk, but also to underground services, power lines above, tree canopies and existing road equipment.

“The installation is not complete at the moment, as there are other items to add. We still need to install tactile warning strips near the poles for the visually impaired,” they said.


Source link

]]>
Motorola Edge 30 Ultra brings Surface online; Displays a punch hole display, three rear cameras https://cummingthefragrance.com/motorola-edge-30-ultra-brings-surface-online-displays-a-punch-hole-display-three-rear-cameras/ Fri, 12 Nov 2021 05:50:33 +0000 https://cummingthefragrance.com/motorola-edge-30-ultra-brings-surface-online-displays-a-punch-hole-display-three-rear-cameras/ The launch of the Motorola Edge 30 Ultra could be imminent, as the smartphone’s renderings have an inline surface, hinting at some key specs and expected design. The Motorola Edge 30 Ultra is expected to launch under the name Moto Edge X in the Chinese market. The tilted images mostly correspond to all the past […]]]>

The launch of the Motorola Edge 30 Ultra could be imminent, as the smartphone’s renderings have an inline surface, hinting at some key specs and expected design. The Motorola Edge 30 Ultra is expected to launch under the name Moto Edge X in the Chinese market. The tilted images mostly correspond to all the past leaks and speculations that have cropped up around the smartphone. The leaked renders of the Motorola Edge 30 Ultra show a perforated design for the selfie camera. The handset also has an in-display fingerprint sensor and a triple camera module on the back.

Motorola Edge 30 Ultra aka Moto Edge X was seen in renderings share by known tipster Steve Hemmerstoffer (@OnLeaks) in collaboration with 91Mobiles. As mentioned, the leaked renderings show the handset in blue and gray colors. Motorola is likely to present the Edge 30 Ultra in more color options. The upcoming Motorola handset features a perforated display with slim bezels and flat edges. The power button is visible on the left spine of the phone, while the volume rocker is on the right side. The smartphone is also expected to feature a Google Assistant button and fingerprint sensor. Additionally, a microphone, speaker grille, and USB Type-C port are visible at the bottom.

As for optics, the leaked renders show that the phone may come with a triple rear camera setup, which corroborates past leaks. A rectangular module is shown to house the rear cameras as well as an LED flash and noise canceling microphone. The Motorola Edge 30 Ultra would measure 163.1 x 76.5 x 8.8mm (10mm, including the rear camera bump).

Previous leaks suggested the Motorola Edge X might feature a 6.67-inch Full HD + OLED display with a 144Hz refresh rate and HDR10 + support. It is slated to pack the Qualcomm Snapdragon 898 chipset and would come in two RAM and storage configurations – 8GB + 128GB and 12GB + 256GB. It can run on Android 12. The phone’s triple camera system is designed to include two 50-megapixel snappers and a 2-megapixel depth sensor. For selfies, the smartphone is expected to receive a 60-megapixel shooter. The next Motorola handset is reportedly packed with a 5,000mAh battery with support for 68W fast charging.


Affiliate links can be generated automatically – see our ethics statement for more details.



Source link

]]>
New CAD / CAM Features Extend Workshop’s Three-Axis Capabilities https://cummingthefragrance.com/new-cad-cam-features-extend-workshops-three-axis-capabilities/ Wed, 10 Nov 2021 05:02:39 +0000 https://cummingthefragrance.com/new-cad-cam-features-extend-workshops-three-axis-capabilities/ Mastercam’s Dynamic Motion feature allowed IMS to machine a V-roll part at 1,050 sfm with 25% pitch. Images courtesy of Industrial Machine & Supply, Inc. Industrial Machinery and Supplies, Inc. (IMS) cut its teeth on parts for textile factories. But by the time its founder passed the business on to his son, David Williams, the […]]]>

Mastercam’s Dynamic Motion feature allowed IMS to machine a V-roll part at 1,050 sfm with 25% pitch. Images courtesy of Industrial Machine & Supply, Inc.

Industrial Machinery and Supplies, Inc. (IMS) cut its teeth on parts for textile factories. But by the time its founder passed the business on to his son, David Williams, the local textile industry had shrunk. Williams decided to expand the store’s customer base to international industries such as material handling, agriculture, automotive and consumer goods. However, this required CAD / CAM software.

“I was looking for jobs that I knew I could get if I could just write the programs,” Williams recalls. He knew that IMS needed powerful CAD / CAM software to work with its three-axis CNC milling machines and two-axis CNC lathes, as the limits of hand writing G-code were starting to be felt. The time it would take to accurately program complicated parts by hand was prohibitive, and Williams was aware of the potential for user error.

Williams attended the 1998 International Manufacturing Technology Show (IMTS) to find a solution. There he met Allen Drost Jr., founder of CAD / CAM solutions, a certified Mastercam reseller. “Drost came straight to my store after the event, loaded Mastercam onto my computer, and performed a play right in front of me. He sold me the software there, ”Williams says. “With this software, I am able to take on complex tasks that I could never have envisioned before.”

Over 20 years later, Mastercam has continued to provide Williams and IMS with a competitive advantage.

Dynamic improvements

Several years ago, Williams machined a facial extrusion die for the composite decking industry, which would not have been possible without CAD / CAM software. As impressive as it was then, however, he thinks it could be even more efficient today with some of Mastercam’s new features.

“I knew if I could set a good toolpath, we could make this part,” Williams says. “It was just a matter of finding.”

“That was several years ago, and if I were to do the same part today, I would look at different toolpaths such as OptiRough for roughing the part,” says Williams. “Another of our long-time clients has just brought us a job that we know very well and have done before. This time, however, I said, “We’re going to do it differently now” because there are so many more toolpaths that I understand now that can make this easier. Dynamic toolpaths have really changed the way I think about some of the jobs that we get.

Mastercam’s Dynamic Motion technology uses proprietary algorithms to monitor the raw material and make immediate adjustments to cutting speed and angle during the machining process. CNC Software, the developer of Mastercam, says these adjustments maximize stock removal while minimizing the risk of tool breakage or stock nicks. OptiRough, the software’s method of removing large amounts of material during the roughing phase at previously impossible speeds, is an example of an advanced type of toolpath created with Dynamic Motion.

A photo of IMS President David Williams working on a machine control panel

As part of its customer base diversification, IMS has adopted CAD / CAM software to extend the functionality of its three-axis CNC milling machines and two-axis CNC lathes.

Cutting cycle time

Before even starting a job, Williams finds ways to use Mastercam.

“It helps to quote,” he says. “If I have a complex job – especially a job that has a lot of parts or maybe a lot of steps and operations – I half-program it to see my cycle times. “

Williams took advantage of this capability when he provided a quote for a roll that works in a conveyor system. V-rolls, as Williams calls them, start as 4340 hardened steel bars 4 inches in diameter and 21.625 inches long. To create his quote, Williams uploaded the part drawing to Mastercam and programmed it to find its cycle time.

“For roughing, I could have used a traditional turning toolpath with additional bearings if I had wanted the cut path to go in one direction. With the dynamic toolpath, however, it paced back and forth all the way to the bottom. It saved so much time. “

Williams was able to predict a run at 1050 sfm with a 25% pitch. The 15-operation program took less than 11 minutes for roughing before being completed with a standard contour toolpath. These shortened cycle times allowed Williams to present a more than competitive quote to the customer and win the contract.

A photo of a backspot facial tool, with several triangular pieces raised in a spiral pattern

Mastercam’s advanced toolpaths allowed IMS to machine this tool from the rear face using a three-axis milling center.

Managing new heights of three-axis complexity

Williams also recalls recent work IMS undertook to make a backspot facial tool. “It’s a tool that is used in the shipbuilding industry,” he says. “It attaches to a mandrel and is executed to cut a stain face on the back of a hole. “

“We knew this part would have been easy to make with a multi-axis machine, but we only have our three axes,” Willaims continues. “So the first time we looked at it, we just needed to see if we could do it. I knew if I could find a good toolpath we could do this part. It was just a question of finding.

At first, Williams struggled to maximize the efficiency of the toolpath, so he called the specialists at his dealer, CAD / CAM Solutions. Together, Williams and CAD / CAM Solutions President and Applications Engineer Brian Kadow found a way to efficiently machine the part using IMS’s three-axis milling center.

The part started out as an M2 tool steel bar before being face, turned and reamed on a lathe. Williams then set up a six-degree tilted dividing head indexer, set the hole as center zero, and incorporated Kadow’s suggestion – a high surface speed radial 3D toolpath – before finishing the part. with a contour toolpath using a 0.125 inch spherical mill end. Machining took about eight minutes per tooth. With only six teeth on each part, the total machining time per part was well under an hour, a feat that would not have been possible without the CAM software.


Source link

]]>
Bear goes for a swim in backyard pool :: WRAL.com https://cummingthefragrance.com/bear-goes-for-a-swim-in-backyard-pool-wral-com/ Sun, 07 Nov 2021 15:45:25 +0000 https://cummingthefragrance.com/bear-goes-for-a-swim-in-backyard-pool-wral-com/ A bear was seen swimming in a pool after wandering around a residential area in San Dimas on Friday night. Show transcript a bear wandering around the san dimas neighborhood, causing a stir above his head as he walks calmly along the walls between houses, the bear walks into a backyard and sniffs around a […]]]>

A bear was seen swimming in a pool after wandering around a residential area in San Dimas on Friday night.


Source link

]]>
Wake Forest-North Carolina Live Stream (11/6): How to Watch Online, TV, Time https://cummingthefragrance.com/wake-forest-north-carolina-live-stream-11-6-how-to-watch-online-tv-time/ Sat, 06 Nov 2021 12:57:00 +0000 https://cummingthefragrance.com/wake-forest-north-carolina-live-stream-11-6-how-to-watch-online-tv-time/ Wake Forest will put its best start in program history on Saturday, November 6 against North Carolina. The match will be broadcast live on fuboTV. The 10th-ranked Demon Deacons have an unusual clash against another North Carolina Atlantic Coast Conference team that won’t count towards the league standings. This is the second non-conference game between […]]]>

Wake Forest will put its best start in program history on Saturday, November 6 against North Carolina. The match will be broadcast live on fuboTV.

The 10th-ranked Demon Deacons have an unusual clash against another North Carolina Atlantic Coast Conference team that won’t count towards the league standings.

This is the second non-conference game between the Demon Deacons (8-0, No. 9 CFP) and the Tar Heels (4-4) in three seasons. This stems from a 2015 deal to play a home series outside of ACC play, as they don’t meet as often in the middle of the extended league’s schedule rotation.

This game won’t affect Wake Forest’s push for its first ACC title since 2006, but can impact just about everything else in a special season.

The Tar Heels started the year at No.10, but come into November trying to become eligible for the bowl. They have just lost against the number 8 of Notre Dame.

When is the Wake Forest-North Carolin a game?

The game between Wake Forest and North Carolina is scheduled for 11 a.m. (noon ET) on Saturday, November 6.

Will it be broadcast live?

The match will be broadcast live on fuboTV, which offers a 7-day free trial. The most basic package is the “fubo standard” package, which includes over 100 channels for $ 64.99 per month. Like all cord cutting alternatives, there are plenty of options out there, especially for sports.

Which TV channel will broadcast the match?

The Wake Forest-North Carolina game will air on ABC.

Overview

FLYING FOOTBALL: Expect to see the ball fly often.

Wake Forest quarterback Sam Hartman is 10th in the Bowl Division in passing (309.4 yards) and ninth in passing touchdowns (22). He’s registered 11 touchdowns in the past two weeks against Army and Duke.

“He’s in a little groove right now,” said UNC defensive back Cam Kelly.

UNC’s Sam Howell has seen the preseason hype wear off, but he still ranks 13th in FBS with TD assists (19) and 16th in assists (274.0). He’s also racked up 98 yards or more in five games with six rushing scores.

“Anyone who criticizes Sam Howell and the way he plays hasn’t watched any movies about him,” said Wake Forest coach Dave Clawson.

MAIN TARGETS: AT Perry of Wake Forest and Josh Downs of North Carolina are tied for seventh nationally with eight touchdowns, while Downs is ranked in the top five in receiving yards (122.4) and receptions (8, 8) per game.

The UNC said Downs is the first player nationally with at least eight catches and one touchdown in eight straight games since Fresno State’s Davante Adams – now a pro Bowler with the NFL Green Bay Packers – had some. nine in a row in 2013.

KEY AREAS: Wake Forest has flourished in two key areas. One is the revenue margin, with Demon Deacons ranking fourth in FBS in terms of revenue margin (up 10). Another is the third percentage, where Wake Forest ranks fifth (51.2%).

The Tar Heels are here to move the chains (tied for seventh at 49.5%), but have simply broken even this season.

THE SERIES: The series began in 1888, and the teams had met every year from 1944 to 2004 before the league’s expansion beyond nine teams made such meetings less frequent. The non-conference series came about because the teams were not scheduled to meet in the league for six seasons (2016-21).

Wake Forest won the first non-conference home game of 2019 in a match that ended in a refereeing error, and then the teams got an additional clash with the ACC last year when the league went changed its programming model due to the COVID-19 pandemic. UNC won it 59-53, rallying 21 in the third quarter behind Howell, setting program records with 550 passing yards and six touchdowns as well as a rushing score.

LIST CHANGES: UNC has seen several players enter the transfer portal in recent weeks to change their depth chart, most recently with wide receiver Emery Simmons and defensive lineman Kristian Varner this week. Simmons has started six games with 11 catches for 243 yards so far, but has not played against Notre Dame, while Varner has been in 10 games in more than two seasons.

The school said reserves Khafre Brown to wide receiver, Clyde Pinder Jr. to defensive lineman and running back Josh Henderson had also entered the gate in the past two weeks.

The Associated Press contributed to this report.


Source link

]]>